Visus MPEG-4 DVR Manual de usuario Pagina 69

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 80
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 68
User’s Manual
www.dynacolor.com.tw
All rights reserved
69
5.6.4.2 Video Loss Detect >
This item allows user to enable / disable Video Loss as an alarm event.
Select <ON> to enable Video Loss alarm events, <OFF> to disable. The
default setting is <ON>.
5.6.4.3 Motion Detect >
Use to enable or disable the motion detection function of the DynaGuard
TM
100 MPEG-4 DVR. By default, the value is <OFF>.
If motion detection function is enabled, it is required to define the motion
detection parameters such as detection area and sensitivity settings.
5.6.4.4 Detection Configuration >
If motion detection function is enabled, it is required to define the motion
detection parameters such as detection area and sensitivity settings. Select a
channel for setting the parameters, move the cursor to <Detection Config>,
and press ENTER. The Detection Configuration menu displays as follows.
Detection Config
1. Detected Area Setup
2. Sensitivity
3. Area Threshold
75%
60%
----- Detected Area Percentage -----
40%
Vista de pagina 68
1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 79 80

Comentarios a estos manuales

Sin comentarios